MacBook Won't Turn On? Here Are 11 Quick Ways to Fix it

MacBook Won’t Turn On? Here Are 11 Quick Ways to Fix it

People use MacBooks for their elegant design, exceptional performance, and reliability. MacBooks provide the quality that makes them the top choice for professionals, creatives, and everyday users. However, like any other electronic device, MacBooks may also show glitches and sometimes won’t turn on. There can be a lot of reasons why your Mac won’t turn on. But don’t worry; fortunately, various troubleshooting steps exist to get your MacBook running again.

In this blog, we will discuss quick troubleshooting ways to help your MacBook start working again.

How to Fix a MacBook that Won’t Turn On?

If your MacBook is not turning on after you have pressed the power button, this guide will help you understand the issue with your MacBook and how to solve that problem with some quick troubleshooting.

Check the Power Connection

First and foremost, check the physical power connections. The physical connection might be the culprit for your MacBook showing a blank screen; be sure the battery is not dead. Ensure the power connection is ON and the MacBook charger properly plugs into the device. Check the power cable that is connected to your MacBook device. Wiggle it a bit because sometimes cables need a little push to start working.

Inspect the charger’s wire thoroughly to check if it is damaged or bent. Ensure your power outlet is in working condition. Sometimes, the simple solution to turn on a MacBook is to change the charger or opt for another power outlet.

Disconnect External Devices

The malfunctioning external devices might be the reason why your MacBook is not turning on. If your MacBook is not turning on, disconnect all external devices, such as USBs, hard disks, or printers. The external devices should be unplugged for the time being. After removing external devices, restart your device by pressing and holding the power button. The MacBook will start if the external device is causing the issue.

Reset the SMC

The system management controller handles important settings such as fan control and temperature monitoring. If something goes wrong with it, your MacBook may not turn on. Troubleshoot your MacBook SMC by following the steps.

  • Unplug your laptop from the charger and all the external devices.
  • Hold Shift + Control + Alt and the power button simultaneously for ten seconds.
  • Release all keys and reconnect the charger.
  • Lastly, press the power button to start your MacBook.

If your MacBook was not turning on due to an SMC error, it should now start up normally. If it still does not turn on, go to the next step.


If your MacBook is not turning on, resetting the PRAM/NVRAM might help. NVRAM (Non-volatile Random-Access Memory) and PRAM (Parameter RAM) store important data, including volume settings, startup disk selection, screen resolution, and kernel panic information. The issue might be resolved if you follow the procedure below to reset it.

  • Press the Command + Option + P and R keys simultaneously while holding the power button.
  • Keep holding the keys until the MacBook restarts twice, then release them.

Resetting the PRAM/ NVRAM might help your MacBook turn on if it does not go to the next step.

Check Display Issue

You may think your Mac won’t turn on when you see nothing on the screen. But that is not always the case. Your Mac may be ON already; only the screen is not working. Therefore, it is important to double-check any signs of power, sounds, and lights to avoid a misdiagnosis.

Suppose you hear noises and receive feedback while performing actions on your MacBook, but the screen remains black. In that case, you can try booting it into Recovery Mode, which can help resolve issues the MacBook may be experiencing.

To do this, simultaneously press your keyboard’s Command + R keys. If this does not work and your device is still not turning on, your MacBook display screen has gone. Look for professional Mac computer repair services that provide genuine Apple parts to get your display changed.

Boot in Safe Mode

Booting the MacBook into safe mode helps to identify and isolate software-related issues that might be causing the problem of the MacBook not turning on.

Press the power button to boot your Mac in Safe Mode until you see the loading startup options. Then select volume and press and hold the Shift key while clicking “Continue.”

The MacBook will restart automatically, and when the login window appears, you should see Safe Boot in the menu bar.

Perform Power Cycle

If your display is not showing and your device is on, your MacBook is either On or in a sleep state. To perform a power cycle, turn off your MacBook. Connect the original Apple charger to your MacBook and hold the power button for at least ten seconds. By doing this, the laptop’s power is cut off, and you might hear noise while doing this.

Once you have held down the power button and released it, leave it off for a few seconds. Then, press it again to start the MacBook as usual. If it’s turned on, that’s great, but if it is still not turning on, take it to an authentic and reliable computer repair shop that offers expert Apple Mac repair services to get it checked.

Check for Faulty RAM

If you hear beeps continuously from the device, your Mac could have RAM issues that are causing your Mac not to turn on.

If your MacBook has multiple RAMs, remove one at a time and then turn on your MacBook. This process can help identify which RAM is causing the issue. Remove the faulty RAM and turn on your device, and it will start working. Learn the most common Apple Mac repairs and how to avoid them to let your MacBook stay for long.

Reinstall macOS

Reinstalling macOS can be the best solution if your Mac fails to start up and you have applied all other options. The process for reinstalling macOS is different for Apple Silicon and Intel-based Macs. It is important to choose the right method for your Mac. Before starting the reinstallation process, it is highly recommended to back up your data using Time Machine. This will help you restore your data if anything goes wrong.
Here is how you can factory reset your Mac in case it fails to start up properly:

  • Enter your Mac’s Recovery mode
  • Select Disk Utility from the options you’re given
  • Find your system disk in the list and select it
  • Click Erase
  • When it’s done, quit Disk Utility and select Reinstall macOS
  • Click Continue and accept the license agreement
  • Follow any other prompts to complete the installation

If you are based in Canada, and your MacBook is acting up you can get it checked from the nearest computer shop in Toronto. The expert technicians can better help you diagnose the issue why it is not turning on.

Seek Professional Help

If none of the above solutions work, it’s time to consult Apple Support or visit an Apple Authorized Service Provider. There could be underlying hardware issues that require professional attention. Expert technicians at Mac computer repair shops can troubleshoot the issue more professionally.


We hope this guide helps you troubleshoot the issue of why your Macbook is not turning on. You can discover why your MacBook is not working by carefully applying each step. But if you’ve done all the steps and your Mac still doesn’t work, you’ll need to take it to the computer shop in Toronto to fix it.

Infotech Computers in Toronto has professional experts who can repair and resolve computer-related issues. Get your MacBook checked by expert technicians quickly and efficiently.

Main Menu